SDE SinclairRequest a quote

Double cantilever · Profile 01

T-Frame solar carport.
Two rows, one column.

The T-Frame solar carport puts one column on the center line and cantilevers the truss out over both sides, so one row of columns covers two rows of parking.

Section · T-Frame7° tilt

Where it fits

Why a T-Frame.

The T-Frame solar carport is SDE's double cantilever design, also known as a tee. A single row of I-beam columns runs down the center line, and each column carries a canopy truss that cantilevers out the same distance on both sides. One row of foundations covers two rows of stalls, which keeps pier counts, steel and install time down on large commercial lots.

01

Double-loaded rows

Covers the stalls on both sides of a center line from one row of columns.

02

Balanced cantilever

Equal reach each way keeps loads on the column centered.

03

Open drive aisles

Columns sit between stalls, so aisles and door swings stay clear.

Technical overview

Four main components. Nothing extra.

Like every SDE carport, the T-Frame ships prefabbed to your module in four main components: the column, canopy truss, C-purlins and strongbacks. Crews learn it once, and every row goes up faster than the last.

SDE T-frame solar carport render showing columns, canopy truss and C-purlins
01 · I-Beam Column

Specifications

By the numbers.

Because the reach is balanced, the load on each T-Frame column stays centered under wind and snow. Values shown are typical. Final spans and foundations are set by the site-specific PE-stamped drawings for your wind and snow loads.

SDE carport frame render with purlins installed before modules
Foundation
Pier, spread footing, Hex Cage
Max grade
10° N-S / E-W
Orientation
Portrait, 3-4-6 High
Snow load
0 – 80 PSF
Carport style
T, Y & L-Frame
Wind load
0 – 130 MPH
Post spacing
24' – 27'
Material
Structural Steel, Galvanized
Tilt angles
7° standard
Modules
All Tier 1 Modules
Clearance
15'-0" Standard
Warranty
25 years
ApplicationsParking lots

FAQ

T-Frame questions, answered.

What is a T-Frame solar carport?

A T-Frame solar carport, also called a double cantilever or tee, uses one row of columns down the center line, with a canopy truss that cantilevers out the same distance on both sides. It covers two rows of parking from a single row of foundations.

Should I choose a T-Frame or a Y-Frame?

Both cover two rows of parking from one column line. Choose the T-Frame for one balanced canopy over both rows, and the Y-Frame when you want rain and snowmelt to drain to the center line.

Where do the T-Frame columns go?

On the center line between two rows of stalls. The columns sit between spaces, so drive aisles and door swings stay clear.

What loads is the T-Frame designed for?

SDE systems are designed for 0 to 130 mph wind and 0 to 80 psf snow. Final loads, spans and foundations for your site are set by the PE-stamped drawings.

Which modules and foundations work with the T-Frame?

All Tier 1 modules, in portrait orientation 3, 4 or 6 high. Foundations are concrete pier, spread footing or Hex Cage, depending on the soil and the geotech report.

Start a project

Get a stamped design for your lot.

Send us the site. We will come back with spans, foundations and a PE-stamped drawing set built for your wind and snow loads.

PE-stamped
Site-specific drawings with every project
Made in USA
100% made in the USA, out of Marshall, Michigan
25-yr warranty
Structural steel, galvanized to last