SDE SinclairRequest a quote

Dual tilt · Profile 02

Y-Frame solar carport.
Built to drain.

The Y-Frame solar carport raises two canopy wings outward from a single center column, so rain and snowmelt run to the middle instead of off the front edges.

Section · Y-Frame7° tilt

Where it fits

Why a Y-Frame.

The Y-Frame solar carport is SDE's butterfly design, also known as a Y-shape or dual tilt carport. Two canopy wings rise outward from a single center column, so the panels slope down toward the middle. Rain and snowmelt run to one line over the columns instead of dripping onto the front of every stall, and one row of columns still covers two rows of parking.

01

Center-line drainage

Water runs to one line over the columns, away from the stall fronts.

02

Double-loaded rows

Like the T-Frame, one row of columns covers two rows of stalls.

03

A distinct profile

The butterfly shape reads clearly from the street and the lot.

Technical overview

Four main components. Nothing extra.

Like every SDE carport, the Y-Frame ships prefabbed to your module in four main components: the column, canopy truss, C-purlins and strongbacks. Crews learn it once, and every row goes up faster than the last.

SDE T-frame solar carport render showing columns, canopy truss and C-purlins
01 · I-Beam Column

Specifications

By the numbers.

With both wings draining to the center, the Y-Frame keeps water along the column line and away from the stall fronts. Values shown are typical. Final spans and foundations are set by the site-specific PE-stamped drawings for your wind and snow loads.

SDE carport frame render with purlins installed before modules
Foundation
Pier, spread footing, Hex Cage
Max grade
10° N-S / E-W
Orientation
Portrait, 3-4-6 High
Snow load
0 – 80 PSF
Carport style
T, Y & L-Frame
Wind load
0 – 130 MPH
Post spacing
24' – 27'
Material
Structural Steel, Galvanized
Tilt angles
7° standard
Modules
All Tier 1 Modules
Clearance
15'-0" Standard
Warranty
25 years
ApplicationsParking lots

FAQ

Y-Frame questions, answered.

What is a Y-Frame solar carport?

A Y-Frame solar carport, also called a butterfly, Y-shape or dual tilt carport, has two canopy wings that rise outward from a single center column. The panels slope toward the middle, so water drains to the center line.

Should I choose a Y-Frame or a T-Frame?

Both cover two rows of parking from one column line. The Y-Frame sends rain and snowmelt to the center instead of off the front edges, which keeps stall fronts and walkways drier.

Where does the water go on a Y-Frame?

It runs down both wings to one line over the columns, away from the front of each stall, instead of dripping along the outer edges of the canopy.

What loads is the Y-Frame designed for?

SDE systems are designed for 0 to 130 mph wind and 0 to 80 psf snow. Final loads, spans and foundations for your site are set by the PE-stamped drawings.

Which modules and foundations work with the Y-Frame?

All Tier 1 modules, in portrait orientation 3, 4 or 6 high. Foundations are concrete pier, spread footing or Hex Cage, depending on the soil and the geotech report.

Start a project

Get a stamped design for your lot.

Send us the site. We will come back with spans, foundations and a PE-stamped drawing set built for your wind and snow loads.

PE-stamped
Site-specific drawings with every project
Made in USA
100% made in the USA, out of Marshall, Michigan
25-yr warranty
Structural steel, galvanized to last